Filter
Top Products
Using the Speakerphone
13
75+0)"6*'"52'#-'42*10'
/#-+0)"#"%#..
To make a call using the speakerphone, press
LINE 1
or
LINE 2
, listen for the dial tone, then dial the number. The
LINE 1 SPEAKER or LINE 2 SPEAKER indicator lights
green on the base, and
8Wi[
8Wi[8Wi[
8Wi[
and
B_d[ý'
B_d[ý'B_d[ý'
B_d[ý'
or
B_d[ý(
B_d[ý(B_d[ý(
B_d[ý(
appear on
the handset’s display as a reminder that the line is in use.
If either line indicator is flashing, someone at the handset is
using the line. Press the line button for the line that is not in
use.
To end a speakerphone call, simply press
LINE 1
or
LINE 2
.
The line indicator turns off.
#059'4+0)"#"%#..
To answer a call using the speakerphone, press
LINE 1
or
LINE 2
(whichever is flashing), or any number key. The line
indicator for the selected line lights.
8
88
8Wi[
Wi[Wi[
Wi[
and
B_d[ý'
B_d[ý'B_d[ý'
B_d[ý'
or
B_d[ý(
B_d[ý(B_d[ý(
B_d[ý(
appear on the handset's display as a reminder that the line
is in use.
If you receive a call on a line while you are talking on the
speakerphone on the other line, the other line’s indicator
flashes and you hear a low ring if you have set
RING VOL
for
that line to any position other than
OFF
. Press the line button
for the incoming call. The current call is automatically put on
hold.
#FLWUVKPI"VJG"5RGCMGTRJQPG"8QNWOG
To set the speakerphone’s volume, slide
VOLUME
on the
right side of the base.
75+0)"/76'
While talking on the speakerphone, you can temporarily turn
off the phone’s microphone by pressing
MUTE
so the other
party cannot hear you. The line indicator flashes red when a
line is muted. Press
MUTE
again to resume your
conversation.
±
±
"016'"
±
"
Mute is released when you press
INTERCOM, HOLD, or press either
line button to switch the line.