Filter
Top Products
The Integrated Answering Device
64
3. To stop recording, press the MENU soft
key and
VOL/RING/ or VOL/RING/ to
select
Call Record, and then press
the
OK soft key. You will hear a
confirmation tone.
From the base
1. During a conversation using the base
speaker phone, press and hold
MEMO/REC on the base until you hear a
confirmation tone. The unit begins
recording and “- -” flashes on the display.
A confirmation tone, that can be heard by
both parties, sounds during recording.
2. To stop recording, press
XPLAY/STOP
or MEMO/REC. You hear a confirmation
tone.
REMOTE OPERATION
You can check, play, or delete messages,
even record a new greeting message from a
remote location (when you are away from
home, or from another room using a
handset). Additionally, you can turn On or
Off your answering system remotely. Ô
Remote access away from home
You can operate your answering system
from a remote location using any
touch-tone telephone.
1. Call your telephone number and wait
for the system to answer. If the
answering system is off, it will answer
after about ten rings and sounds a
series of beeps.
2. During the greeting message (or a
series of beeps when the answering
system is off), press 0 and enter your
PIN code within two seconds (see
“Setting a PIN Code” on page 21 or 55).
Ô NOTES Ô
• Time stamp will not be
heard until you have set
the time. See “Setting
the Time” on page 54.
• The system will only
playback messages for
four minutes and then it
returns to the command
waiting mode. To
continue playing your
messages, press 0 then
2 again within 15
seconds.
• If you enter an incorrect
PIN code three times,
you will hear a beep and
the system will return to
standby.
• During the remote
operation,
“Line Remote”
appears on the handset.
• If the answering system
is recording an incoming
message, the recording
operation is canceled
when you start remote
operation.