Filter
Top Products
Expanding Your Phone
48
FOUR-WAY CONFERENCING
A fourth person, at either the handset or the
base, may be added to the conference call.
For example, to add a fourth party to an
ongoing conference call at the base or
another handset, press
TALK/FLASH on the
fourth party’s handset (or
SPEAKER on the
base). To remove either caller from your
conversation, press
END on the party’s
handset (or
SPEAKER on the base). The
other parties will still be connected to the
call.
INTERCOM/CALL TRANSFER
FEATURE
Intercom and Call Transfer features are
available for your phone. Ô
Intercom
From handset to handset or to the base
1. Press
INTCM/HOLD in standby mode.
2. Select the base or the handset you
want to talk with from the selection list
within 30 seconds. To select the
handset (or the base), press
VOL/RING/ or VOL/RING/ , and then
press the
OK key. If you select All, all
handsets and the base will be paged.
An intercom tone sounds.
To Cancel intercom press the
CANCEL
soft key on the initiating handset.
3. On the receiving handset (or the base),
to answer the call, press
TALK/FLASH,
the
ANSWER soft key or INTCM/HOLD
(or PAGE/INTCOM, or SPEAKER on the
base). Or press any number key,
/
TONE/<
or #/> (when Anykey Answer is
on), or pick up the handset from the
cradle (when AutoTalk is on).
Ô NOTES Ô
• If the party is busy or out
of range, the handset
returns to standby mode.
• If any of the following
occurs while selecting
the other handset (or the
base), the operation will
be canceled.
-Press TALK/FLASH
or SPEAKER.
- Receive an outside/
intercom call or page.
• When the party does not
answer within one
minute, the operation is
canceled.