Filter
Top Products
Making and Receiving Calls
28
From the Base (Receiving calls
only)
1. Press SPEAKER and begin speaking. Ô
2. To hang up, press SPEAKER.
PLACING A CALL ON HOLD
You can place a call on hold for five
minutes. When five minutes has passed, the
call is disconnected, and the phone returns
to standby mode. Ô
1. During a call, press
INTCM/HOLD on the
handset or
HOLD on the base. The call
will be put on hold.
2. To talk to the caller, press
TALK/FLASH
or SPEAKER on a handset (or SPEAKER
on the base). The phone will return
back to the call.
REDIALING A CALL
The last three phone numbers dialed can be
quickly redialed from the handset. Redial
numbers stored in the handset are
independent from each other. Ô
1. With the phone in standby mode, press
the
REDIAL soft key.
To hang
up
Press END or return the handset to
the cradle (Auto Standby).
To enter a
pause
within the
dialing
sequence
When you dial the number press the
PAUSE soft key.
P appears in the
display, which represents a pause.
From the Handset
Normal
conversation
Hands-free
conversation
Ô NOTES Ô
Making and Receiving
Calls
• The base microphone is
located under the base.
Position yourself as near
to the base as possible.
Placing a Call on Hold
• While a call is on hold,
CIDCW can not be
received.
• If you leave a call on
hold for more than 10
seconds, the display
screen will read,
Line
On Hold.
Redialing a Call
• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.