Filter
Top Products
Making and Receiving Calls
32
TONE DIALING SWITCH OVER
Some telephone companies use equipment
that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to
enter tone dialing digits, you can switch-
over to tone dialing during the call. This
feature is useful when you need tone dialing
to use automated systems, for example,
entering your bank account number after
you have called your bank. Ô
Initially make your call with the pulse dialing
mode. Once your call connects, press
/TONE/<. Enter the desired number. These
digits will be sent as tone dialing. Once the
call ends, the tone mode is canceled and
pulse dialing mode resumes.
TRAVELLING OUT-OF-RANGE
During a call, as you begin to move your
handset too far from your base unit, noise
may increase. If you pass the range limits of
the base unit, you will hear a beep and see
Out of Range on the display, and then
the handset returns to standby mode.
PRIVACY MODE
Privacy mode prevents interruption from
other registered handsets or the base. This
works only when the phone is in use.
1. Press the
MENU soft key on the
handset.
2. While you are using the Phone, press
VOL/RING/ or VOL/RING/ to move
the pointer to
Privacy Mode and
then the
OK soft key.
Privacy Mode On and appear in the
display. To exit Privacy Mode, repeat above
step when Privacy Mode is on.
Privacy
Mode Off appears.
Ô NOTES Ô
• The tone feature only
applies when the dial
mode is set to pulse.
This special number can
be stored in a memory
location.
• This is referred to as
Chain Dialing (see
“Chain Dialing” on
page 40).