Filter
Top Products
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 38
Automatic Call Distribution
The phone allows automatic call distribution (ACD) login and logout. This
feature depends on support from a SIP server.
Configuration changes can performed centrally at the boot server:
Local Web Server
(if enabled)
Specify the local SIP signaling port and an array of SIP servers to
register to.
Navigate to http://<phoneIPAddress>/appConf.htm#se
For up to six registrations (depending on the phone model, in this
case the maximum is six even for the IP 601 and 650), specify a
display name, a SIP address, an optional display label, an
authentication user ID and password, the number of line keys to use,
and an optional array of registration servers. The authentication user
ID and password are optional and for security reasons can be omitted
from the configuration files. The local flash parameters will be used
instead. The optional array of servers will override the servers
specified in sip.cfg in non-Null. This will also override the servers on
the appConf.htm web page.
Navigate to http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.
Local
(continued)
Local Phone User
Interface
Use the SIP Configuration menu to specify the local SIP signaling
port, a default SIP server to register to and registration information for
up to twelve registrations (depending on the phone model). The SIP
Configuration menu contains a sub-set of all the parameters available
in the configuration files.
Either the Web Server or the boot server configuration files or the
local phone user interface should be used to configure registrations,
not a mixture of these options. When the SIP Configuration menu is
used, it is assumed that all registrations use the same server.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.
For more information, refer to Local <local/> on page A-6, Server
<server/> on page A-7, and Registration <reg/> on page A-89.
Central
(boot server)
Configuration file:
sip.cfg
Turn this feature on or off.
• For more information, refer to Feature <feature/> on page A-83.
Configuration file:
phone1.cfg
Enable this feature per registration.
• For more information, refer to Registration <reg/> on page A-89.