Polycom SIP 3.0.2 IP Phone User Manual


 
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 108
device.auth.regUserx any string The SIP registration user name for registration x
where x = 1 to 12.
device.auth.regPasswordx any string The SIP registration password for registration x
where x = 1 to 12.
device.sec.configEncryptio
n.key
any string Configuration encryption key that is used for
encryption of configuration files.
device.syslog.serverName dotted-decimal IP address
OR
domain name string
The syslog server IP address or host name.
The default value is NULL.
device.syslog.transport None=0,
UDP=1,
TCP=2,
TLS=3
The protocol that the phone will use to write to the
syslog server.
If set to “None”, transmission is turned off, but the
server address is preserved.
device.syslog.facility 0 to 23 A description of what generated the log message.
For more information, refer to section 4.1.1 of RFC
3165.
The default value is 16, which maps to “local 0”.
device.syslog.renderLevel 0 to 6 Specifies the lowest class of event that will be
rendered to syslog. It is based on
log.render.level
and can be a lower value.
Refer to Basic Logging <level/><change/> and
<render/> on page A-77.
device.syslog.prependMac Enabled, Disabled If enabled, the phone’s MAC address is prepended
to the log message sent to the syslog server.
device.em.power Enabled, Disabled, Null Refer to the EM Power parameter in Main Menu on
page 3-6.
device.net.etherVlanFilter Enabled, Disabled Refer to the VLAN Filtering parameter in Ethernet
Menu on page 3-11.
device.net.etherStormFilter Enabled, Disabled Refer to the Storm Filtering parameter in Ethernet
Menu on page 3-11.
device.sec.SSL.certList all, custom, default The type of certificate list.
device.sec.SSL.customCert X.509 certificate The certificate value.
Name Possible Values Description