Filter
Top Products
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 48
Alert Reports <alert/>
This configuration attribute is defined as follows:
voice.qualityMonitoring.collector.enable.tri
ggeredPeriodic
0, 1, 2 0 Controls the generation of periodic
quality reports triggered by alert
states.
If set to 0, alert states do not cause
periodic reports to be generated.
If set to 1, periodic reports will be
generated when an alert state is
critical.
If set to 2, periodic reports will be
generated when an alert state is
either warning or critical.
Note: This parameter is ignored
when
qualityMonitoring.collector.e
nable.periodic
is set 1, since
periodic reports are sent throughout
the duration of a call.
voice.qualityMonitoring.collector.period 5 to 20 20 The time interval between
successive periodic quality reports.
Attribute
Permitted
Values Default Interpretation
Attribute
Permitted
Values Default Interpretation
voice.qualityMonitoring.collector.
alert.moslq.threshold.warning
Null, 15 to 40 Null Threshold value of listening MOS
score (MOS-LQ) that causes phone
to send a warning alert quality
report. Configure the desired MOS
value multiplied by 10. If set to Null,
warning alerts are not generated
due to MOS-LQ.
For example, a configured value of
35 corresponds to the MOS score
3.5.
voice.qualityMonitoring.collector.
alert.moslq.threshold.critical
Null, 15 to 40 Null Threshold value of listening MOS
score (MOS-LQ) that causes phone
to send a critical alert quality report.
Configure the desired MOS value
multiplied by 10. If set to Null,
critical alerts are not generated due
to MOS-LQ.
For example, a configured value of
28 corresponds to the MOS score
2.8.