Filter
Top Products
Configuration Files
A - 69
Keys <key/>
These settings control the scrolling behavior of keys and can be used to change
key functions.
SoundPoint IP 301, 320, 330, 430, 501, 550, 560, 600, 601, and 650 and
SoundStation IP 4000 key functions can be changed from the factory defaults,
although this is typically not necessary. For each key whose function you wish
to change, add an XML attribute in the format described in the following table
to the <keys .../> element of the configuration file. These will override the
built-in assignments.
In the following table, x=IP_300, IP_330, IP 430, IP_500, IP_550, IP_600, IP_650,
and IP_4000 and y is the key number. Note that IP_300 parameters affect
SoundPoint IP 301 phones, IP_330 parameters affect SoundPoint IP 320 and
330 phones, IP_430 parameters affect SoundPoint IP 430 phones, IP_500
parameters affect SoundPoint IP 501 phones, IP_550 parameters affect
SoundPoint IP 550 and 560 phones, IP_600 parameters affect SoundPoint IP
600 and 601 phones, IP_650 parameters affect SoundPoint IP 650 phones,
IP_4000 parameters affect the SoundStation IP 4000 phones. IP 300: y=1-35; IP
330: y=1-34; IP 430: y=1-35; IP 500: y=1-40; IP_550: y=1-40; IP 600: y=1-42;
IP_650:y=1-42; IP_4000:y=1-29.
Attribute
Permitted
Values
Default Interpretation
key.scrolling.timeout positive
integer
1 The time-out after which a key that is enabled for
scrolling will go into scrolling mode until the key is
released. Keys enabled for scrolling are menu
navigation keys (left, right, up, down arrows), volume
keys, and some context-specific soft keys. The value is
an integer multiple of 500 milliseconds (1=500ms).
Polycom does not recommend the remapping for keys.
Attribute Permitted Values Interpretation
key.x.y.function.prim Functions listed below. Sets the function for key y on platform x.
key.x.y.subPoint.prim positive integer Sets the sub-identifier for key functions with
a secondary array identifier such as
SpeedDial.