Filter
Top Products
Configuration Files
A - 89
Per-Phone Configuration
This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone
configuration files. For more information, refer to Deploying Phones From the
Boot Server on page 3-15.
The parameters include:
• Registration <reg/>
• Calls <call/>
• Diversion <divert/>
• Dial Plan <dialplan/>
• Messaging <msg/>
• Network Address Translation <nat/>
• Attendant <attendant/>
• Roaming Buddies <roaming_buddies/>
• Roaming Privacy <roaming_privacy/>
• User Preferences <user_preferences/>
Registration <reg/>
SoundPoint IP 301, 320, 330, and 430 support a maximum of two unique
registrations, SoundPoint IP 501 supports three, the SoundPoint IP 550 and 560
supports four, and SoundPoint IP 600, 601, and 650 support six. Up to three
SoundPoint IP Expansion Modules can be added to a single host SoundPoint
IP 601 and 650 phone increasing the total number of buttons to 12 registrations
on the IP 601 and 34 registrations on the IP 650. Each registration can
optionally be associated with a private array of servers for completely
segregated signaling. The SoundStation IP 4000 supports a single registration.
Polycom recommends that you create another file with your organization’s
modifications. If you must change any Polycom templates, back them up first.
For more information, refer to the “Configuration File Management on SoundPoint
IP Phones” whitepaper at www.polycom.com/support/voice/.