Filter
Top Products
Configuration Files
A - 47
Quality Monitoring <quality monitoring/>
This attribute includes:
• Central Report Collector <collector/>
• Alert Reports <alert/>
• Server <server/>
• RTCP-XR <rtcpxr/>
Central Report Collector <collector/>
This configuration attribute is defined as follows:
voice.vad.signalAnnex
B
0, 1 Null If set to 1 and
voice.vadEnable
is set to 1, Annex B is
used. A new line can be added to SDP depending on the
setting of this parameter and the
voice.vadEnable
parameter.
• If
voice.vadEnable
is set to 1, add attribute line
a=fmtp:18 annexb="yes" below a=rtpmap… attribute
line (where '18' could be replaced by another
payload).
• If
voice.vadEnable is set to 0
, add attribute line
a=fmtp:18 annexb="no" below a=rtpmap… attribute
line (where '18' could be replaced by another
payload).
If set to 0 or Null, there is no change to SDP.
Attribute
Permitted
Values Default Interpretation
Attribute
Permitted
Values
Default Interpretation
voice.qualityMonitoring.collector.enable.pe
riodic
0, 1 0 Enables generation of periodic
quality reports throughout a call.
voice.qualityMonitoring.collector.enable.se
ssion
0, 1 0 Enables generation of a quality
report at the end of each call.