Filter
Top Products
scribe to a system, refer to “Creating a Login” on page 59.
12.11.4.1 Selecting a Login
If you want to change to another system manually, do the following:
Press
Menu to enter main menu.
Scroll to
Settings and press Select.
Scroll to
Advanced and press Select.
Scroll to
Login and press Select.
Scroll to
Select Login and press Select.
Scroll to the desired login and press
Select.
12.11.4.2 Removing a Login
Logins can be removed from the system in use and from the 9 other systems (if con-
nected).
Note: Removing a login requires a password. Password is factory set at 0000.
Press
Menu to enter main menu.
Scroll to
Settings and press Select.
Scroll to
Advanced and press Select.
Scroll to
Login and press Select.
Scroll to
Remove login and press Select.
Scroll to the desired login and press
Select.
Enter your password and press
Ok.
Note: If the system in use is removed, it is necessary to select
one of the remaining
systems or to subscribe to a new one.
Note: If one of the systems not chosen is removed, the handset remains connected to
the
system in use.
12.11.4.3 Creating a Login
To create a login, the system must allow subscriptions to be made. Some systems also
require an Authentication Code (AC). If more than one system currently permits sub-
scription, you will need to know the ID of the system to which you want to subscribe.
Authentication Codes and
system ID’s will be provided be the system administrator.
You can subscribe up to 10 systems, that is create 10 logins.
59