Polycom 5040 Cordless Telephone User Manual


 
4.7 Speed Dial
If you have assigned a number to one of the speed-dialing keys 0-9, do the following:
• While on hook, press digit equivalent to number of the contact in the speed dial list
continuously until call is started.
Note: For more inform
ation about adding number to speed dial, refer to “Adding to
Speed Dial” on
page 31.
5 Answering Calls
The handset must be subscribed and registered to answer a call. For more information
about subscribing, refer to “Creating a Login” on page 59.
When handset rings, display
shows the icon for incoming calls and the caller infor-
mation appears below if
supported by the subscribed
system.
• Press to answer a call when your handset rings.
. Note: You can distinguish between an internal and external call by the ring tone. The
ring tone of an internal call is followed by three short beeps.
5.1 Auto Answer
When auto answer is turned on, the handset automatically goes off hook when an
incoming call arrives.
If subscribed to a wireless solution, the handset automatically goes on hook when calls
are terminated.
Press
Menu to enter main menu.
Scroll to
Settings and press Select.
Scroll to
Auto answer and press Select.
Scroll to
On or Off and press Change.
Note: When charging, auto answer is inactive.
5.2 Mute a Call
Press Silence and the ring signal is muted.
5.3 Reject a Call
Note: Rejecting a call is system dependent. If supported by the subscribed system, do
the following:
24