Filter
Top Products
Appendix A. CPC-EX 2.3 Feature Update Section 530-ISDN Ref.
Page A-2 DBS Manual - Revised April 2000 DBS-2.3-400
*Private Password - The private password feature allows a user to enter
programming and access to all programming parameters including the system
and remote passwords. The private password may always be used to enter the
system.
*Additional Remote Administration Interface (RAI) Access Method - In
addition to the existing RAI access, a new RAI access method has been
added. The RAI access allows an incoming call to be transferred to the RAI
(either manually or by Automated Attendant) and then the caller enters the
remote or private password.
ISDN Programming Flexibility - The existing ISDN programming has been
enhanced to allow programming flexibility in the following areas: Network
Type, Auto Progress, NSF, ISDN CO Type, ISDN International Dial Code
Deduction, ISDN Long Distance Code 1 Deduction, and ISDN Type and Plan
Option.
Software Corrections
SMDR Stopped Printing - In earlier versions, the SMDR output from the
DBS would stop printing and not reset. This problem has been corrected with
this version.
SMDR Header Printed More Often Than Every 60 Lines - In earlier
versions, the SMDR header printed more than every 60 lines. In this version,
the SMDR header now correctly prints out every 60 lines.
Last Digit of Voice Mail One Touch Key Was Truncated - In earlier
versions, if a Voice Mail One-Touch Access key was programmed when the
key was viewed with the Conf. Function, the last digit of the programmed
information could not be seen.
Previously Unable to restrict 800+ Numbers for TRS types 5 and 6 - In
the previous version if an 800-xxx number was entered in the special area and
special office code tables with the new North American Numbering Plan
(NANP) activated TRS types 5 and 6, it did not restrict the call. This problem
has been corrected in this version.
Override Toll Restriction with SSD Numbers Address Was Not
Available - In the previous version, the programming address FF1 2#1#4#
could not be accessed. The address is now available in this version.
DID Call to a Voice Mailbox Received Main Greeting - In the previous
version, in a Non-Integrated Digital PanaVOICE environment, if a DID/
DNIS call was directed directly to a voice mail box, the caller was sent to the
main greeting instead of the correct voice mail box. This problem has been
corrected with this version.