Filter
Top Products
DBS-2.3-400 DBS Manual - Revised April 2000 Page A-17
3. Perform ISDN reset function:
Note: DID settings are not maintained after reset function.
4. Set system configuration:
5. Set the clock synchronization sources:
Sync Source 1:
Sync Source 2:
Sync Source 3:
6. Cycle the unit's power switch.
7. Configure number of “B” channels per cabinet:
Master:
Slave:
8. Set trunk type per channel for ISDN:
Master Cabinet Set-Up:
Refer to “Typical Central Office Configurations” for setting the following
options. Default settings are bold.
Set up master span:
0-Public
(1)
1 (0-8)
(1-3)
(1-3)
(1-3)
(0-23)
(0-23)
(trunk number) (5)
(0-1) Network Type