Filter
Top Products
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 9
Setting up the base unit
Overview
1 Connect the AC adaptor.
2 Connect the telephone line cord.
Refer to one of the following methods depending on your situation.
LTo connect to a 2-line telephone jack: page 10
LTo connect to 2 single-line telephone jacks: page 10
LTo connect to a single-line telephone jack: page 10
For DSL service subscribers:
LTo connect to a 2-line telephone jack: page 11
LTo connect to 2 single-line telephone jacks: page 11
Connecting the AC adaptor
Connect the AC adaptor, then raise the antennas.
LUse only the included Panasonic AC adaptor PQLV206.
Note:
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
LThe unit will not work during a power failure. We recommend connecting a corded
telephone to the same telephone line or to the same telephone jack using a Panasonic
T-adaptor (page 4).
(120 V AC, 60 Hz)
Hook
TH112(e).book Page 9 Tuesday, July 18, 2006 3:54 PM