Filter
Top Products
Preparation
20 For assistance, please visit http://www.panasonic.com/phonehelp
Dialing mode Y ^
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
LYou only need to program this setting
once, using either the handset or base
unit.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Set tel line” i {SELECT}
3 “Set dial mode” i {SELECT}
4 Select the desired setting. (Default:
“Tone”) i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Set tel line” i {SET}
3 “Set dial mode” i {SET}
4 Select the desired setting. (Default:
“Tone”) i {SET} i {STOP}
Date and time Y ^
LYou only need to program this setting
once, using either the handset or base
unit.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Date and time” i {SELECT}
3 Enter the current month, day, and year
by selecting 2 digits for each.
Example: May 15, 2006
{0}{5} {1}{5} {0}{6}
4 Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30
{0}{9} {3}{0}
5 Press {*} to select “AM” or “PM”.
6 {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Date and time” i {SET}
3 Enter the current month, day, and year
by selecting 2 digits for each.
Example: May 15, 2006
{0}{5} {1}{5} {0}{6}
4 Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30
{0}{9} {3}{0}
5 Press {*} to select “AM” or “PM”.
6 {SET} i {STOP}
Note for handset and base unit:
LIf you make a mistake when entering the
date and time, press {^}, {V}, {<}, or
{>} to move the cursor, then make the
correction.
Handset
Base unit
Handset
Base unit
TH112(e).book Page 20 Tuesday, July 18, 2006 3:54 PM