Filter
Top Products
Intercom
For assistance, please visit http://www.panasonic.com/phonehelp 39
Call share
This feature allows the handset or base
unit to join an existing outside call (land
line call).
Joining a conversation Y ^
To join the conversation, press {LINE1} or
{LINE2} to select the line that is being
used by another extension for an outside
call.
L“Conference” is displayed.
To join the conversation, press {LINE1} or
{LINE2} to select the line that is being
used by another extension for an outside
call.
L“Conference” is displayed.
Note for handset and base unit:
LMultiple parties can join a conference
call. The possible number of
participating parties depends on the
resources available for wireless
communication. When another
participating party cannot join a
conversation, “System is busy.
Please try again later.” is
displayed.
Call privacy Y ^
Call privacy allows you to prevent other
users from joining your conversations with
outside callers. To allow other users to join
your conversations, leave this feature off.
Press {PRIVACY} during an outside call.
LWhen this feature is turned on
“PRIVACY” is shown in the top of the
display.
LTo turn this feature off, press
{PRIVACY} again. “PRIVACY”
disappears from the display.
Note:
LWhile you are using both lines
simultaneously, or you are on a
conference call, {PRIVACY} is not
displayed. Use the following procedure
to turn this feature on or off. Press
{MENU} during an outside call, then
press {2} to select “Privacy on” or
“Privacy off”.
1 Press {MENU} during an outside call.
2 To turn this feature on, select “Privacy
on”.
To turn this feature off, select “Privacy
off”.
3 {SET}
LWhen this feature is turned on
“PRIVACY” is shown in the lower
right.
Note for handset and base unit:
LThis feature will turn off after you hang
up the call.
Handset
Base unit
Handset
Base unit
TH112(e).book Page 39 Tuesday, July 18, 2006 3:54 PM