Filter
Top Products
i
Answering System
For assistance, please visit http://www.panasonic.com/phonehelp 53
Listening to messages
using the handset
When new messages have been
recorded:
–“New message” is displayed.
– The message indicator on the handset
slowly flashes amber if the message
alert feature is turned on (page 58).
1 {MENU} (center of joystick)
2 i i {SELECT}
LThe handset plays new messages
including memo messages.
LWhen you have no new messages,
the handset plays back all messages.
3 Press {OFF} when finished.
Note:
LTo switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Push {^} or {V} while listening to a
message.
Voice guidance
If you do not press any buttons after the
last message is played back, the unit’s
voice guidance starts. Operate the
answering system by following the
guidance as necessary.
Useful features during playback
Y
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to the message.
Press {LINE1} or {LINE2} during
playback.
Note:
LTo edit the number before calling back,
press {EDIT} to select the desired
format (page 33).
LIf you have registered a cellular phone to
the base unit (page 59), you can call the
caller back by pressing {CALL}, then
pressing {LINE1} or {LINE2} while
listening to the message.
Answering system commands
You can also select the desired line(s) and
press dial keys to access certain
answering system functions using the
handset during playback.
1 {MENU} (center of joystick) i i
i {SELECT}
2 Select the desired line(s) if necessary.
For line 1: {#}{1}
For line 2: {#}{2}
For line 1 and line 2: {#}{0}
LAfter selecting the line(s), memo
messages do not play.
3 Press the desired dial keys.
Key Command
{1} or {<} Repeat message (during
playback).
*1
{2} or {>} Skip message (during
playback).
{4} Play new messages.
{5} Play all messages.
TH112(e).book Page 53 Tuesday, July 18, 2006 3:54 PM