Filter
Top Products
Using a Cellular Phone with this Unit
60 For assistance, please visit http://www.panasonic.com/phonehelp
Storing your area code (for
users dialing only a 7-digit
phone number to make a local
call) ^
You need to add your area code when
making calls
*1
using a cellular line. Once
you store your area code, this feature
allows you to automatically add your area
code to the beginning of the 7-digit phone
number when making calls
*1
using a
cellular line.
*1 The area code is automatically added
when:
– dialing a 7-digit phone number
manually
– dialing a 7-digit phone number saved
in the redial list
– dialing a 7-digit phone number stored
in the phonebook
– dialing an edited phone number with
7 digits in the caller list
1 {MENU} i {#}{8}{0}{0}
2 Enter 3-digit area code i {SET}
Note:
LYou can store only one area code.
Connecting the cellular phone
^
You need to connect a registered cellular
phone to the base unit in order to make or
answer calls using a cellular line with this
system.
Important:
LAfter connecting your cellular phone to
the base unit, and if you carry your
cellular phone far from the base unit
(example: if you leave the house with
your cellular phone) the connection will
be lost. After returning within closer to
the base unit’s range you need to
reconnect the cellular phone to the base
unit. Some cellular phones lose
connection after usage, please check
the specification of your cellular phone
for more details.
LWhen registering an additional cellular
phone to the base unit, cellular phones
already connected to the base unit lose
connection. You need to reconnect the
cellular phones to the base unit.
1 Press the desired CELLULAR SELECT
button ({1} to {5}).
2 “Connection” i {SET}
L“Connection(OK)” is shown and
the CELLULAR SELECT button is lit
in yellow-green if the cellular phone is
connected to the base unit.
3 {STOP}
Note:
LIn step 2, the base unit requires your
cellular phone to accept the connection.
Depending on your cellular phone, it
may ask you if you accept the
connection requirement from the base
unit. Refer to the operating instructions
of your cellular phone for further
operations.
LAfter connecting your cellular phone to
the base unit, if the cellular phone is too
far from the base unit (out of the base
unit's range), or there is an interference
from other electrical units, the cellular
phone’s connection is disconnected. We
recommend you place the cellular phone
closer to the base unit.
TH112(e).book Page 60 Tuesday, July 18, 2006 3:54 PM