Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 47
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
–if k or l is not displayed on the
handset, or
–if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to “A”.
LYou only need to program this setting
once, using either the handset or base
unit.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Set tel line” i {SELECT}
3 “Set line mode” i {SELECT}
4 Select the desired line.
5 Select the desired setting. (Default: “B”)
i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Set tel line” i {SET}
3 “Set line mode” i {SET}
4 Select the desired line.
5 Select the desired setting. (Default: “B”)
i {SET} i {STOP}
Changing the PIN (personal
identification number) ^
For security, the PIN must be entered
when changing certain settings such as
registering units. The default setting is
“7262”.
Important:
LIf you change the PIN, please make note
of your new PIN. The unit does not
reveal the PIN to you.
1 {MENU} i h i {SET}
2 “Set PIN” i {SET}
3 To change the PIN for the first time, skip
to step 4.
To change the PIN, enter the current 4-
digit PIN. i {SET}
4 Enter the new 4-digit PIN. i {SET}
5 Enter the new 4-digit PIN again. i
{SET} i {STOP}
If you forget the PIN (resetting the base
unit to its default settings)
If you set the PIN and you cannot
remember it, you can reset the base unit
using the following procedures.
Base unit:
{MENU} i {MUTE} i
{#}{9}{0}{0}{0}
Note:
LThe following items are reset to their
default settings:
– Settings indicated by “*2” in the
feature column on page 87
– Answering system: On
– Line selection for answering system:
Line 1 and line 2
LIf you have registered a cellular phone,
the following cellular phone settings are
also reset to their default settings.
–“Assign Base/HS” (Allows you to
select which unit to ring for cellular
calls, page 65): “All”
Handset
Base unit
TH112(e).book Page 47 Tuesday, July 18, 2006 3:54 PM