Filter
Top Products
i
Answering System
58 For assistance, please visit http://www.panasonic.com/phonehelp
Caller’s recording time ^
You can change the maximum message
recording time allotted to each caller.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 {MENU} i A i {SET}
2 “Recording time” i {SET}
3 Select the desired line.
4 Select the desired setting. (Default:
“3min”) i {SET} i {STOP}
Note:
LIf the message memory becomes full,
the unit automatically switches to the
“Greeting only” mode. New
messages will not be recorded.
Recording mode ^
You can select a recording mode.
Enhanced recording provides improved
sound quality, but the total recording
capacity is reduced.
1 {MENU} i A i {SET}
2 “Recording mode” i {SET}
3 Select the desired item. (Default:
“Standard recording 60min”) i
{SET} i {STOP}
Call screening ^
This feature allows you to monitor a
message from the speaker when the
answering system is recording the
message.
1 {MENU} i A i {SET}
2 “Call screening” i {SET}
3 Select the desired item. (Default: “On”)
i {SET} i {STOP}
Message alert Y
You can select whether or not the
message indicator on the handset slowly
flashes amber when new messages are
recorded (page 53).
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Message alert” i {SELECT}
3 Select the desired setting. (Default:
“Off”) i {SAVE} i {OFF}
Note:
LWhile message alert feature is on,
battery operating time will be shortened
(page 13).
TH112(e).book Page 58 Tuesday, July 18, 2006 3:54 PM