Filter
Top Products
C
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 25
Handset clarity booster Y
This feature can improve sound clarity
when the handset is used in an area where
there may be interference. During an
outside call, this feature is turned on
automatically when necessary. You can
also turn this feature on or off manually.
1 Press {MENU} (center of joystick)
during an outside call.
2 To turn this feature on, select “Booster
on”.
To turn this feature off, select “Booster
off”.
3 {SELECT}
Note:
LWhile this feature is turned on;
– the battery operating time is
shortened (page 13).
– the maximum number of extensions
that can be used at a time may
decrease.
Handset voice enhancer Y
This feature clarifies the voice of the
person you are talking to, reproducing a
more natural-sounding voice that is easier
to hear and understand (page 44).
1 Press {MENU} (center of joystick)
during an outside call.
2 To turn this feature on, select “Voice
enhancer”.
To turn this feature off, select “V.E.
off”.
3 {SELECT}
Note:
LDepending on the condition and quality
of your telephone line, this feature may
emphasize existing line noise. If it
becomes difficult to hear, turn this
feature off.
Using the other line
during a call
When a call is being received on the other
line during a conversation, the interrupt
tones sound (page 43). k or l on the
handset, or {LINE1} or {LINE2} on the
base unit flashes rapidly. You can answer
the 2nd call while holding the 1st call.
You can also make a call without ending
the 1st call.
Example: If you are using line 1
1 Press {HOLD} 2 times to put the 1st
call (line 1) on hold.
2 Press {LINE2} to make or answer a
2nd call.
LTo hold the 2nd call, press {HOLD} 2
times.
3 To return to the 1st call (line 1), press
{LINE1}.
Example: If you are using line 1
1 Press {HOLD} to put the 1st call (line 1)
on hold.
2 Press {LINE2} to make or answer a
2nd call.
LTo hold the 2nd call, press {HOLD}.
3 To return to the 1st call (line 1), press
{LINE1}.
Note for handset and base unit:
LIf you subscribe to Caller ID, the 2nd
caller’s information is displayed when a
call is being received on the other line
(page 31).
Handset
Base unit
TH112(e).book Page 25 Tuesday, July 18, 2006 3:54 PM