Filter
Top Products
User Programming
User Manual 79
— To store a pause, press PAUSE.
(Refer to Pulse to Tone Conversion in the Features Guide)
— To store a feature number to convert pulse signals to DTMF (Dual Tone Multi-
Frequency) signals, press the and # keys. (Refer to Pulse to Tone Conversion in the
Features Guide.)
— To prevent displaying of all or part of the number, press SECRET before and after the
secret number, or your entry will not be stored. (Refer to Secret Dialing in the Features
Guide.)
• If you are storing an external number, enter the line access code (default: 9, 81 through 88)
before the number. When dialing, a pause is automatically inserted after the code.
• If you are storing an account code, enter the account code before the line access code. (Refer
to Account Code Entry in the Features Guide.)
• It is possible to store a number consisting of 25 digits or more by storing it in two speed dial
numbers. The line access code should be stored in the first speed dial number.
• To access another speed dial number in step 3 through 6, press SELECT and start with step
3.
• To display parts of the number which have scrolled off the display, press or .
• Program [002] "System Speed Dialing Name Set" is used to name the speed dial numbers.
User Manual References
4.3.80 System Speed Dialing
4.5.8 KX-T7235 Display Features - Call Directory
4.5.11 KX-T7431 / KX-T7433 / KX-T7436 Display Features - Call Directory