Filter
Top Products
Station Features and Operation (DPT/SLT)
User Manual 115
• Two extensions can set each other as the destination extension. In this case, an intercom call
to the other party while he/she is absent will not be forwarded back to the original extension.
• Confirmation tone
Confirmation tone 2 (two beeps) is sent when the previously programmed data is same as
the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to the "Tone List" in
the Appendix.
• You can call the original extension from the Call Forwarding destination extension. (Boss
Secretary)
<PT>
• Both the Call Forwarding and Do Not Disturb (DND) functions can be programmed at
the same time, but either one of them can be activated at a time.
• You can enable or disable the Call Forwarding or Do Not Disturb (DND) function by
pressing the FWD/DND button while on-hook. If you set both Call Forwarding and
DND, alternating the mode is also available by pressing the FWD/DND button. In this
case, pressing the button changes the setting as follows:
The lighting patterns of the FWD/DND button are as follows:
Off: Both functions are canceled.
Red on : DND mode
*1
Red flash : FWD mode
*1
• With the KX-T7436 and KX-T7235, you can set or cancel the Call Forwarding features
using the display operation.
<7250>
• FWD/DND button
A flexible button on the KX-T7250 (no FWD/DND button provided) can be assigned to
a flexible (CO, DSS, PF) button by Station, User or System Programming.
<ISDN Telephone>
• This feature is not available for ISDN telephones.
User Manual References
2.2.2 Flexible Button Assignment
4.3.15 Call Forwarding — CANCEL
4.3.37 Do Not Disturb (DND)
4.3.88 Voice Mail Integration
4.5.2 Call Forwarding / Do Not Disturb (KX-T7436 / KX-T7235 only)
*1
This setting can changed by System Programming.
DND FWD OFF