Filter
Top Products
User Programming
User Manual 71
Before entering the user programming mode
Before entering the user programming mode, confirm that:
• Your telephone is on-hook, and
• No calls are on hold at your telephone.
Entering the user programming mode
To enter the User Programming mode:
• The display shows the Initial Message: USR-PGM NO?
Note
• If nothing is entered within five seconds after the PROGRAM button is pressed,
programming mode is canceled.
• During the programming mode, your extension is treated as a busy extension.
• Only one proprietary telephone can be in programming mode at any one time.
• The User Programming Password is not shown on the display for security reason. The
password can be changed by System Programming.
Programming Guide References
[120] User Password
In this section, programs [001] through [004] are explained. Please consult with your dealer
when you need to change the following programs:
• [005] Flexible CO Button Assignment
• [006] Operator / Manager Extension Assignment
• [007] DSS Console Port and Paired Telephone Assignment
• [008] Absent Messages
• [009] Quick Dial Number Set
• [012] ISDN Extension Number Set
• [013] ISDN Extension Name Set
• [014] VM Name Set
Press PROGRAM + + + User Programming Password (default:1234)