Filter
Top Products
Station Features and Operation (DPT/SLT)
User Manual 231
4.3.64 Outward Dialing, Line Access — SUMMARY
A CO line can be accessed in the following ways.
Conditions
• The CO button assignment on your telephone can be re-arranged as required. Refer to
2.2.2 Flexible Button Assignment.
• After dialing the feature number or pressing the CO button, you will hear one of the
following tones:
Dial tone : Indicates an idle outside line is accessed.
—is shown on the display. (xx: outside line number)
Busy tone : Indicates the selected outside line is busy.
—is shown on the display.
Reorder tone :
1) Indicates the outside line you have attempted to access is not assigned.
—is shown on the display.
2) Indicates access to outside lines is denied.
—is shown on the display.
• may show on the display or if you hear a reorder tone, the call is
restricted for one of the following reasons.
<PT users>
Line Access, Automatic
Dial the feature number (9).
or
Press a Loop-CO (L-CO) button
Line Access, Outside Line
Group
Dial the feature number (8) and an
outside line group (1-8).
or
Press a Group-CO (G-CO) button.
Line Access, Individual Press a Single-CO (S-CO) button.
<SLT and ISDN telephone users>
Line Access, Automatic Dial the feature number (9).
Line Access, Outside Line
Group
Dial the feature number (8) and an
outside line group number (1-8).
COXX
CO in use
CO Not Assigned
Restricted
Restricted