Filter
Top Products
DPT Overview
30 User Manual
" " indicates that the feature is available.
Line Access Buttons
The following three types of CO buttons can be used to seize a outside line when making a call.
• Single-CO (S-CO) button
• Group-CO (G-CO) button
• Loop-CO (L-CO) button
Conditions
• A flexible CO button can be assigned as a Line Access Button (S-CO, G-CO or L-CO) in
either System/Station Programming. Once a flexible CO button is assigned as a Line Access
Button, it provides the line status condition by lighting patterns and green/red indication.
Please refer to "LED Indication" in this section.
• You can set the G-CO and L-CO buttons on one telephone. Incoming and outgoing calls on
the line are shown on the button in the following priority.
S-CO > G-CO > L-CO
Single-CO (S-CO) button
An S-CO button is a outside line access button. This allows you to access a specific outside
line by pressing an S-CO button. An incoming outside call can be directed to an S-CO button.
Conditions
• The same outside line cannot be assigned to more than one S-CO button on a PT.
• It is possible to assign the same outside line to an S-CO button, a G-CO button and an L-
CO button respectively.
User Manual References
2.2.2 Flexible Button Assignment
4.3.64 Outward Dialing, Line Access — SUMMARY
* Available when the Digital Super Hybrid System is connected to a Digital Proprietary
Telephone capable Panasonic Voice Processing System(one that supports digital
proprietary telephone integration; e.g., KX-TVS100).