Filter
Top Products
Station Features and Operation (DPT/SLT)
212 User Manual
• Even if the MESSAGE buttons are neither provided nor assigned, dial tone 4
*1
after going
off-hook informs you if a message has been received at your extension. For single line
telephone users, a special ring tone can be provided as notification.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can set or cancel this
feature using the display operation.
<7250>
• A flexible button on the KX-T7250 (no MESSAGE button provided) can be assigned as
the MESSAGE buttons.
<SLT>
• Single line telephone users with a message waiting lamp can activate the lamp in the
same way as a MESSAGE button on the proprietary telephone by connecting a SLT
Message Waiting Lamp Adaptor Unit (KX-TD194) to the system. The message waiting
lamp lightning pattern can be selected from twelve patterns. System Programming is
required to use this feature.
<ISDN Telephone>
• This feature is not available for ISDN telephones.
Programming Guide References
[005] Flexible CO Button Assignment
[130] Message Waiting Control
[131] Message Waiting Lamp Assignment
[132] Message Waiting Port Set
[216] Message Waiting Ring Interval Time
[990] System Additional Information
User Manual References
2.2.2 Flexible Button Assignment
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu
*1
One of the dial tones. Refer to the "Tone List" in the Appendix (Section 6).