Filter
Top Products
Station Programming
62 User Manual
To store a name
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
Refer to the Combination Tables 1 and 2 in 2.2.8 Station Speed Dialing Number/Name
Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only] for information on how to
enter each character.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Combination Table
Each character can be entered by using the dial key pad, various buttons or the Jog Dial for
storing names.
Combination Table 1 shows the combination of the keys and the number of times to press the
SELECT (AUTO ANSWER/MUTE) button, or the combination of the key and the SHIFT and
Soft buttons to enter each character. (The AUTO ANSWER/MUTE button becomes the
SELECT button when using the overlay.)
To enter a character, find the key and number of times to press the SELECT button or the
corresponding SHIFT and Soft button combination from the table. Press the corresponding key
first, then press the SELECT button the required number of times. Or you can use the SHIFT
button and a Soft button (S1 through S3) instead of the SELECT button.
The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, "Not Stored" is displayed.)
<PT Display Example>
(
-
Name is now
programmed.)
CLR NEXT
7431 / 7433
Press NEXT (S3) or MODE.
Enter the name.
desired name
MODE
S 1
S 2
S 3
NEXT
Enter a station speed dial
number (0 through 9).
station speed dial no.
Dial .
or
-
NEXT(S3) button: for KX-T7433 users
-
MODE button: for KX-T7431 users
Press STORE.
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
Mike Graham