Filter
Top Products
Station Features and Operation (DPT/SLT)
190 User Manual
4.3.46 External Modem Control [PT only]
Allows you to control the external modem, connected to the system with a RS-232C cable, by
sending a pre-assigned AT Command (for enabling Automatic Answer, etc.).
Activating an AT Command to RS-232C
Conditions
• An AT Command can only be programmed by Serial Interface/remote programming
software.
• For more information about the AT Command, please refer to the modem instructions.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
Programming Guide References
[100] Flexible Numbering
[806-807] Serial Interface (RS-232C) Parameters
Features Guide References
External Modem Control
User Manual References
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu
PT
Lift the handset or press
SP-PHONE/MONITOR
.
Hang up or press
SP-PHONE/MONITOR
.
Confirmation tone
Enter
the AT Command
number (1 through 5)
-1: for Command 1
-2: for Command 2
-3: for Command 3
-4: for Command 4
-5: for Command 5
AT Command no.
Dial 791.
97 1
<PT Display Example>
MODEM Command X
AT Command number