Filter
Top Products
63
Answering System
Setting the Unit to Call a Pager
1
Press (RECALL/PLAYBACK).
•The number of new messages is heard on the handset.
2
Press (3).
•“” is displayed on the base unit.
•If “” is not displayed, the pager number is not
stored. Store the number (p. 62, 63), and try again.
3
Press (RECALL/PLAYBACK).
To turn off the pager call mode,
repeat steps 1 through 3.
•“” will disappear.
•Each time you press (3) in step 2,
the mode will turn on or off.
PAGER
PAGER
PAGER
* Pager companies require a delay after the pager number and/or the
access code is dialled. Contact your pager company regarding the
required pause time. Pressing (REDIAL/PAUSE) once creates a 3.5
second delay and counts as one digit.
•If the line has rotary or pulse service, press
(*)
between the pager number and
(REDIAL/PAUSE) in step 7.
8
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (EXIT/CH).
To confirm the stored pager number
Press (DIGITAL!SP-PHONE)
➡
(AUTO/PROGRAM)
➡
(#).
•The unit dials the stored pager number.
•If the pager does not beep, check your pager by calling it manually to ensure it
works. Store the pager number again.
To erase the stored pager number
Repeat steps 1 to 6 on page 62
➡
press á (Yes key)
➡
press (EXIT/CH).
•The pager call mode will automatically return to OFF.
(RECALL/PLAYBACK)