Filter
Top Products
18
Programmable Functions
H
LCD contrast
Set recall
Talk switching
Set area code
TAD program
You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode initially.
During programming:
*To select a desired function item, press Ö or Ñ repeatedly until the
arrow points to the item. Then press á to go to the next step.
•You can exit the programming mode any time by pressing (EXIT/CH).
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base Place on cradle and try again.” is displayed.
Lift the handset, and press (FUNCTION/EDIT).
<Function menu>*
To store an item in the directory (p. 45).
To select the ringer volume (p. 20).
Press á.
To select the LCD contrast (p. 21).
To select the recall time (p. 56).
To set the auto talk feature (p. 19).
To set your area code (p. 22).
To program answering system functions (p. 25).
H
Save directory
Ringer volume
Program
<Function menu>*