Filter
Top Products
62
Pager Call
This feature allows you to alert your pager when the unit records an
incoming message. You can retrieve the message from a touch tone
telephone (p. 64).
First store the pager number, then set the unit to call the pager.
•Consult your pager company to check whether the service alerts your
pager automatically or via an operator. If an operator is used, this
feature cannot be used.
Make sure that the unit is in the standby mode initially.
Storing a Pager Number
1
Press (FUNCTION/EDIT).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press á (Yes key).
•“P” is displayed on the base unit.
6
Press (#) .
•“–” is displayed on the base unit.
7
#Enter your pager number, and press (REDIAL/PAUSE) twice.*
Enter the access code, if required by your pager company, and
press (REDIAL/PAUSE) twice again.*
$Enter the call back number to be displayed on the pager (the
telephone number where your unit is connected).
%Press (#) if required by your pager company.
•The entered number is displayed on the base unit.
•If you misdial, press Ü and start again from step 5.
•You can enter a total of 48 digits.
H
Program
GF H
=Yes
H
LCD contrast
Set recall
GF H
=Yes
H
TAD program
GF H
=Yes
H
Save directory
Ringer volume
GF H
=Yes
Answering
system setting