Filter
Top Products
27
Preparation
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2” to “7” or “AUTO (Toll saver*)”.
Your phone comes from the factory set to “AUTO”.
1
Press (FUNCTION/EDIT).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press á (Yes key).
•“P” is displayed on the base unit.
6
Press (2).
•The current setting is displayed on the base unit.
0: Selects “AUTO”. “A” is displayed on the base unit.
2–7: The unit will answer after the selected number of rings.
7
Press (0), or (2) to (4) to set the number of rings.
•The setting is displayed on the base unit.
8
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (EXIT/CH).
*Toll saver (when set to “AUTO”)
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
H
Program
GF H
=Yes
H
LCD contrast
Set recall
GF H
=Yes
H
TAD program
GF H
=Yes
H
Save directory
Ringer volume
GF H
=Yes
Answering
system setting