Filter
Top Products
Subscriber’s Manual
72
for Caller Select.
2. to accept the current
setting, then continue from j).
• To change the current
setting, continue from step
1.
l) Auto Forwarding Status
1. to change the current
setting (enable or disable).
• If set to "Disable", continue
from Step 6.
m)Forwarding Mailbox Number
1. to change the current
setting.
• If there's no mailbox
number is assigned,
continue from Step 2.
2. Enter the forwarding mailbox
number.
3. to accept.
n) Forwarding Delay Time
1. to change the current
setting.
2. Enter the delay time, and #.
3. to accept.
o) Forwarding Mode
1. to change the current
setting (Copy or Move).
2. to accept, then continue
from l).
6. The Auto Forwarding Status
parameter is the last parameter to
be entered. When this entry is
completed, the prompt at step 3
will appear. Continue assigning or
editing other mailboxes by
repeating from step 4.
7. to return to the Main
Menu.
Deleting a Mailbox
The System Manager should delete
mailboxes that are no longer needed.
When another person accesses the VPS,
the action is automatically canceled.
1. Log in to the Main Menu.
• See 6.1 Logging in to the
System Manager's Mailbox.
2.
3. Enter the mailbox number.
4. to delete the mailbox.
Resetting a Mailbox Password
When a password is forgotten, the
System Manager must reset the
password before it can be reassigned by
the subscriber.
1. Log in to the Main Menu.
• See 6.1 Logging in to the
System Manager's Mailbox.
2.
3. Enter the mailbox number.
4. to delete the password.
Note
• The password for System Manager
cannot be deleted here. The System
Administrator needs to reset their
password using KX-TVA Maintenance
Console.
• After the password is reset, the
conditions will be as follows:
<Subscribers' mailboxes>
3
4
1
1
2
1
2
1
2
4
1
2
1
4
1
3
1