Filter
Top Products
Subscriber’s Manual
130
A3.5 Live Call Screening Private/Hands-Free Mode
Assignment
This program assigns a VPS response for when a message is being left in a mailbox.
It determines whether an alert tone is sent or whether the recorded message is played
through the built-in speaker of the extension. The default mode is hands-free. (This
item should be programmed by each extension user through Personal Programming.)
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.6 Live
Call Screening Assignment via PC Programming).
1. Enter Personal Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to
"PROGRAM".
b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The display
changes to PT-PGM Mode.
2. Enter the code that corresponds to the mode you want this telephone to have.
For Hands-free mode:
KX-TD: [71]
KX-TA1232: [71]
KX-TA: [#11]
For Private mode:
KX-TD: [72]
KX-TA1232: [72]
KX-TA: [#12]
Screen output: Hands-Free or Private
3. Press the STORE button.
4. To exit the Personal Programming mode, press the PROGRAM button or set the
MEMORY switch to "SET".
5. Repeat these steps for each telephone.
A single line telephone that is connected to the same extension as a proprietary
telephone can also be used to monitor an incoming message (not available for KX-TA).
Be sure that Live Call Screening on the connected proprietary telephone has been
activated. This feature is useful when you are using a cordless telephone. A tone
sounds to alert the subscriber that a message is being recorded. To intercept the call,
flash the hook.