Filter
Top Products
Subscriber’s Manual
114
A2.7 Live Call Screening Button Assignment
For the Live Call Screening feature to work at an extension, the extension must have
an LCS button lit at the time of the message reception. This button must either be a
DSS/BLF or CO button with a lamp. Follow the procedure below to assign an LCS
button on an extension. (This is station level programming and should be done at each
individual telephone.) PC programming is also available (see A2.12 Button
Assignment via PC Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button you want to assign as the LCS
button.
3. Enter [92].
Screen output: LCS
4. Press the STORE button.
5. Press the PROGRAM button or lift the handset to exit the Personal Programming
mode.
6. Repeat these steps for each telephone.
Conditions: This button must be assigned and lit for LCS to operate. To
light this button, press the button and enter the LCS
password (see A2.2 Live Call Screening Password
Assignment).