Filter
Top Products
Subscriber’s Manual
33
• Press [#] if you do not want to
set a password.
6. State the recipient's name after the
tone.
7. to end recording.
8. for immediate delivery, then
continue from "Recording Your
Message".
• To set message delivery time,
continue from "Setting
Message Delivery Time".
Specifying Multiple Recipients
(External Message Delivery List)
1.
2.
Enter the desired list number (
or ).
3. Enter a 4-digit password required
for listening to the message.
• Press [#] if you do not want to
set a password.
4. for immediate delivery, then
continue from "Recording Your
Message".
• To set message delivery time,
continue from "Setting
Message Delivery Time".
Setting Message Delivery Time
1. Enter the desired delivery time,
then .
For example:
• To enter 5:00, press [5] [#].
• To enter 5:15, press [5] [1] [5]
[#].
2. for AM.
for PM.
• This option may not be
available if the VPS is
programmed to use 24-hour
time.
3. Enter the day of the month for
delivery, then .
For example:
• If today is February 16 and you
enter [1] [7] [#], the message
will be delivered tomorrow.
• If today is February 16 and you
enter [5] [#], the message will
be delivered on March 5.
Recording Your Message
1. to request a receipt.
to continue.
2. to accept.
3. Record your message after the
tone.
• You can pause and resume
recording by pressing [2]. If you
pause for more than 20
seconds, recording will stop
automatically.
4. to end recording.
5. to accept.
6. Go on-hook.
Note
• If you set a password required for
listening to the message, make sure
you notify each recipient what the
password is.
1
#
2
1
2
#
#
1
2
#
1
2
2
1
2