Filter
Top Products
29
Battery Power
CAUTION
Ensure that the backup battery is fully charged before replacing the battery pack and
replace the battery pack within 5 hours; otherwise the data in RAM will be lost.
Do not touch the terminals of the battery pack. The battery pack may no longer function
properly if the contacts are dirty or damaged.
Do not expose the battery pack to water, or allow it to become wet.
The battery pack is not charged when CF-P1 is first purchased. Be sure to charge it
before using it for the first time. When the AC adaptor is connected to CF-P1, charging
begins automatically.
Use only the specified battery pack (CF-VZSU28W) with CF-P1.
Do not install or remove the battery pack while CF-P1 is on.
Remaining Battery
Tap - [Settings] - [System] tab - [Power].
The remaining battery charge is displayed.
When the Remaining Battery Charge Becomes Low
Plug in the AC adaptor, and fully charge your battery.
Use a spare battery if you have one.
If you have neither the AC adaptor nor a spare battery, power off your computer.
About High Temperature Mode
This computer has a high temperature mode function that prevents the degradation of the
battery in high temperature environments.
To use the high temperature mode function, tap - [Settings] - [System] tab - [Panasonic
settings] - [Charging mode] tab, and set [Charging mode] to [High Temperature]. A level
corresponding to a 100% charge for high temperature is approximately equivalent to an 70%
charge level for normal temperature mode.