Filter
Top Products
24
▼ Reviewing Caller ID Numbers
Your phone stores the most recent 30 numbers in Caller ID memory. If the
memory is full, a new call replaces the oldest number. To review your Caller
ID numbers, follow the steps below.
1)
Press CID/MENU, and the Caller ID
summary screen appears. The screen shows
the number of new callers and the total
number of callers stored in Caller ID memory.
2) Press /VOL to scan through the list. The
most recent call appears first with the date,
time, call count, name, and phone number.
Press /VOL to scan back through the list.
3) Press END to return to standby.
NOTE: The number of calls from the same Caller ID appears next to the
received time.
Once you read the new message, the number will disappear.
▼ Calling a Caller ID Number
1) Press CID/MENU, and the Caller ID
summary screen appears. The screen shows
the number of new callers and the total
number of callers stored in Caller ID memory.
2) Select the number that you would like to
dial. Press /VOL to scan forward and
/VOL to scan back through the list.
NOTE:
For long distance dialing, press 1 to add a “1-” to the number on the
display. Press
1 again to remove the “1-” from the display.
Pressing 3 will set or cancel an area code setting.
3) Press TALK/FLASH and the number automatically dials.
NOTE: You cannot make a call from the Caller ID list if your ST88245 is
connected to a private branch exchange (PBX).
You can place a call from Talk Mode. Press the TALK/FLASH key, then
press the CID/MENU key. Select the phone number that you want to dial by
pressing the /VOL or /VOL key. Press the SELECT key.
The displayed phone number will be dialed.
Caller ID
New :01
Total:02
Caller ID
New :01
Total:02
UP044DH (ST88245) OM resize 3/4/04 3:05 PM Page 24