Filter
Top Products
16
7) Press MEM. The handset beeps and
displays the confirmation screen. Memory
storage is complete. For example, if you
store a name and number into memory
location number 7, the display shows
“
Memory07 Stored”. If you store only
the number into memory location number
8, the display shows “<Memory08>”.
After about 2 seconds, Select Memory
screen is displayed.
Repeat steps 2 - 7 to store more numbers.
8) Press END to return to standby mode.
NOTE: You must press a key within 30 seconds or the phone will return to standby.
If you return the handset to the base, the phone will return to standby also.
STEPS FOR ENTERING NAMES AND
SPECIAL CHARACTERS
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the
following order:
Upper case letters first, lower case letters next, and finally the number
corresponding to the key.
Memory07 Stored
07 SONIGEM
08 <Memory08>
09
UP044DH (ST88245) OM resize 3/4/04 3:04 PM Page 16