Filter
Top Products
15
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key strokes.
Your ST88245 stores up to 10 names/numbers in the handset.
1) Press MEM then “
Select Memory”
is displayed.
2) Press /VOL and /VOL, or enter a
number (0 - 9) to select the memory
location where you would like to store
the number.
3) Press SELECT twice. The following screen
appears and a cursor flashes indicating
that the display is ready for the name to
be entered.
If this screen appears, the selected
memory location is already stored. Then
you must either change the entry in this
location, clear the entry in this location,
or select “Go Back” to choose
another location.
4) To enter a name (up to 13 characters), use the number keys.
• See the “Steps for entering names and special characters” (See page 16).
• Use #/ and /TONE/ to move the cursor to the desired location.
• Use CH/DELETE to delete characters as needed.
• Press and hold CH/DELETE to delete all the characters.
• If a name is not required, go to step 5.
5) Press SELECT. “
Store Number” is
displayed. The cursor flashes indicating
that the display is ready for the number to
be entered.
6) Use the number keys, #/ or /TONE/ ,
to enter the phone number. The phone
number cannot exceed 20 digits.
Use PAUSE/REDIAL to enter a pause in
the dialing sequence.
The display shows a “
P”. Each pause counts as one digit and represents a
two second delay of time between the digits as they are sent.
Use CH/DELETE to delete digits as needed.
NOTE: The pause feature is useful for long distance calling, credit card dialing, or
sequences that require a pause between digits.
Select Memory
01
02
Edit Memory02
Delete Memory02
Go Back
Store Name
MEMORY DIALING
UP044DH (ST88245) OM resize 3/4/04 6:13 PM Page 15