Filter
Top Products
13
TEMPORARY TONE
In pulse dialing mode, you can access bank facilities, telephone answering
machines, etc., by pressing the /TONE/ key. This will get you into the
tone mode and will allow you to input the required tone codes. It will reset
automatically to pulse dialing after you end your call.
MAKING AND RECEIVING CALLS
USING YOUR NEW PHONE
NOTE: Refer to page 22 “Setting Up Caller ID Options” to turn on Automatic Call
Connection if desired.
To answer
a call
To make
a call
To hang up
To redial
Handset On Base
Pick up the handset
(Automatic Call Connection:
ON) or pick up the handset
and press TALK/FLASH.
(Automatic Call Connection:
OFF)
1) Pick up the handset.
2) Press TALK/FLASH.
3) Listen for the dial tone.
4) Dial the number.
OR
1) Pick up the handset.
2) Dial the number.
3) Press TALK/FLASH.
1) Pick up the handset.
2) Press TALK/FLASH.
3) Listen for the dial tone.
4) Press PAUSE/REDIAL.
OR
1) Pick up the handset.
2) Press PAUSE/REDIAL,
then press TALK/FLASH.
Handset Off Base
Press TALK/FLASH, any
number, /TONE/ or #/ .
(Automatic Call Connection:
ON) or press TALK/FLASH.
(Automatic Call Connection:
OFF)
1) Press TALK/FLASH.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Dial the number.
2) Press TALK/FLASH.
1) Press TALK/FLASH.
2) Listen for the dial tone.
3) Press PAUSE/REDIAL.
OR
Press PAUSE/REDIAL, then
press TALK/FLASH.
Press END, or return the handset to the base (Automatic
Call Completion).
UP044DH (ST88245) OM resize 3/4/04 3:04 PM Page 13