Filter
Top Products
33
Keys
Functions
While message is not playing While message is playing
2 Delete the current message
playback
4 Repeat playing the current
message from the beginning.
Press twice to skip backward to
play the previous message.
5 Play the message Stop the current message
playback
6 Skip to play the next message
7 Turn on the answering machine Stop the current message
playback
8 Stop the current message
playback
9 Turn off the answering machine
* Enter the 4-digit remote access
PIN
Note
If your answering machine is switched off, the phone will enter into the remote
access mode after 10 rings. You can then enter the 4-digit remote access PIN
(DefaultRemoteAccessPINis0000)toactivatetheremoteaccessfeature.
When your answering machine memory is full and the answer
mode is in Answer & Record, the answer mode will change to
Answer Only automatically. It will change to Answer & Record
mode automatically after some messages have been deleted.
Call Screening
When the answering machine is on and takes a call, you can listen
to the caller leaving a message. You can then identify the caller and
decide whether to take the call in person.
If the answering machine is set to ON, when there is an incoming
message, the handset will display “Screen?”
1. Press <OK> to start call screening. The handset who picks up
the call can listen. You can listen to who is leaving the message
and decide whether to pick up the call or not.
2. The handset will display “Screening”.
3. You can adjust the speaker volume by pressing <UP or
DOWN>.
OR
3. Press <Back> to return to previous screen and you cannot
hear the recording.
At any time if you want to pick up the call, you can press
<PickUp> or <TALK ON> and the message recording will be
stopped automatically. If the answering machine is in the process
of recording, the message already stored will be saved.
answerinG maChine