Filter
Top Products
14 usinG the phone
Delete a redial number
1. Follow steps 1 and 2 section “Save a redial number into the
phonebook”.
2. Press <Menu> and <UP/DOWN> to scroll to Delete.
3. Press <SELECT> and then <OK> to conrm the Delete.
Delete the entire redial list
1. Follow steps 1 and 2 section “Save a redial number into the
phonebook”.
2. Press <Menu> and <UP/DOWN> to scroll to Delete All.
3. Press <SELECT> and then <OK> to conrm the Delete All.
Keypad Lock
You can lock the keypad so that it cannot be used accidentally
while carrying it around.
1. To lock the keypad: In idle mode, press and hold <*> key, the
<Keypad lock icon> will display.
2. To unlock the keypad: In idle mode, press and hold <*> key,
the <keypad lock icon> will disappear.
Find Handset
You can locate the handset by pressing <PAGE> on the base
station. All the handsets registered to the base will ring up to 60
seconds and “Paging” is displayed on the LCD.
You can stop the paging by pressing any key on the handset except
<Silent / Right soft key> or pressing <PAGE> on the base.
Make an Internal Call (For multi-handset
versions only)
This feature is only applicable when there are at least two
registered handsets.
It allows you to make internal calls, transfer external calls from one
handset to another handset and make conference calls.
Intercom another handset
1. Press <INT> and the registered handsets will be listed.
Note
If there are no additional handsets registered in the system, press <INT> will
display “Unavailable”.
2. Press <the handset number> or <LEFT> or <RIGHT> to select
the handset that you want to make an internal call with.
3. Press <Select>.
Note
Select <9> to ring all the registered handsets.
4. The called handset rings and the intercom call will be
established when <TALK ON> / <SPEAKERPHONE> / <LEFT
SOFT KEY> is pressed on that handset.