Filter
Top Products
27
5. Press <OK> and enter your new 4-digit system PIN.
6. Press <OK> and enter your new 4-digit system PIN again.
Note
If the new PIN entered in Step 6 is not matched with the new system PIN
entered in Step 5, “New PIN Invalid” is displayed and you are returned to step 5.
7. Press <OK> to conrm the new PIN.
Reset base settings to default
You can reset your base to its original default settings. After
the reset, all your personal settings will be deleted, but your
phonebook, call list and redial list entries remain unchanged.
1. Press <Menu> and <UP/DOWN> to scroll to Base Settings.
2. Press <Select> and <UP/DOWN> to scroll to BS Default.
3. Press <Select> and enter the 4-digit system PIN (Default
4-digit system PIN: 0000).
4. Press <OK> to conrm the PIN.
5. Press <OK> to conrm the base default reset.
Note
IfthePINcodeisenteredcorrectlyandisconrmedtorestoretheHSsettings
to default settings, “Reset” will display. If the PIN code is entered incorrectly,
“PIN Invalid” will display.
Full ECO Mode
1. Press <MENU> and <UP/DOWN> to select Base Settings.
2. Press <OK> and <UP/DOWN> to select Full ECO Mode.
3. Press <OK> and <UP/DOWN> to select On or Off.
4. Press <OK> to conrm.
Registration
Your handset and base station is pre-registered. Up to six handsets
can be registered to a single base station.
If for some reason, the handset is not registered to the base station
(<Antenna icon> is off), register your handset according to the
following procedure.
1. Press and hold <PAGE> on the base station for about ve
seconds, the base station is entered into registration mode.
2. Press <Menu> and <UP/DOWN> to scroll to Registration.
3. Press <Select> and <UP/DOWN> to scroll to the base station.
4. Press <Select> and enter the 4-digit system PIN.
5. Press <OK> to conrm the registration attempt.
If the handset registration is successful, you will hear a
conrmation tone and the <antenna icon> will stop ashing.
The handset will automatically be allocated the next available
handset number.
The handset will automatically be allocated the next available
handset number.
This handset number is shown in the handset display in standby
mode.
settinGs