Filter
Top Products
64 Using the Feature menu
Procedure Steps
Step Action
1
From the main menu, open the Settings menu.
2 From the Settings menu, open the Call menu.
3
From the Call menu, open the Feature menu.
4
From the Feature menu, select Reset.
5 Press Ok.
The Reset screen appears.
6
Press Yes.
The keys are reset to the default settings. You return to the
Assign menu.
--End--
Labeling a feature
Follow this procedure to change feature labels associated with soft keys.
Relabel Centrex feature labels through the Call Service menu, only. See
"Labeling soft keys" (page 40).
If you are unfamiliar with how to use the dialpad to enter text, see "Using
the dialpad to enter text" (page 93) before you begin this procedure.
Prerequisites
You must be logged on.
Procedure Steps
Step Action
1 From the main menu, open the Settings menu.
2 From the Settings menu, open the Call menu.
3 From the Call menu, open the Feature menu.
4
From the Feature menu, select the feature to relabel.
5 From the submenu, select Label.
The Enter Label screen appears.
6 Press Clear to delete the current label.
7 Use the dialpad to enter the new label.
8 To correct the label, press Bkspc.
9 When you have correctly entered the new label, press Ok.
Carrier VoIP
Nortel IP Phone 2001 User Guide (CICM)
NN10300-005 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.