Nortel Networks IP Phone 2001 Cordless Telephone User Manual


 
17
.
Logging on
Follow this procedure to log on to an IP Phone 2001.
If the Centrex IP Client Manager (CICM) is set up as part of a group of
CICMs, you can choose which CICM to connect to. After you select a
gateway, the terminal directs itself to that CICM and the Username screen
appears.
If a firmware upgrade for the IP Phone 2001 is available, the system
prompts you to upgrade when you log on. If the terminal is below the
minimum level, the only option available is Yes. You cannot log on until
you perform the upgrade. If the firmware level is between the minimum
and maximum level set by the administrator, Yes and No options appear
on the soft keys.
To perform an upgrade, see "Performing a firmware upgrade" (page 54).
Procedure Steps
Step Action
1
If the Selective Gateway Login feature is configured on your
system, press the down navigation key to scroll through the list
to select the gateway.
2 When the gateway you want appears, press Ok, or start entering
your user name.
If the Username Screen appears when you start to enter your
user name, the characters you already entered appear in the
Username field.
3 If you make a mistake entering your user name, press Clear to
clear the field and re-enter your user name.
If your user name is too long for the display (longer than 15
characters), the digits scroll to the left and an ellipsis appears to
the left of the field.
4 Press Ok.
Carrier VoIP
Nortel IP Phone 2001 User Guide (CICM)
NN10300-005 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.