Filter
Top Products
48 Using the User menu
The terminal can operate in one of two login types:
•
Unique—the terminal cannot join a session with an m6350 SoftClient.
• Joint—the terminal can operate in a joint session with an m6350
SoftClient.
In the display, a check mark beside a login type indicates the current
mode.
Prerequisites
You must be logged on.
Procedure Steps
Step Action
1 From the main menu, open the Settings menu.
2 From the Settings menu, open the User menu.
3
From the User menu, select Login Type.
4
Press Ok.
The Unique screen appears.
5
Press the down navigation key to view the Joint screen.
6 Press Ok to return to the User menu.
--End--
Viewing, disabling, or enabling Auto Login
Follow this procedure to view, enable, or disable the Auto Login feature.
Any maintenance activity, for example a firmware upgrade, results in
a forced log off for logged on users. If you enable Auto Login, if you
experience a forced log off, you are automatically logged on to the Centrex
IP Client Manager when the service is available again.
Prerequisites
• You must be logged on.
• You must have permission to edit this feature. If you have permission,
a check mark appears beside Enabled when the screen appears.
Procedure Steps
Step Action
1 From the main menu, open the Settings menu.
Carrier VoIP
Nortel IP Phone 2001 User Guide (CICM)
NN10300-005 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.